§ 59.102. Standards.
131 words·~1 min read·
/us/cfr/t40/s§ 59.102·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)Except as provided in § 59.106 of this subpart, any coating resulting from the mixing instructions of a regulated entity must meet the VOC content limit given in table 1 of this subpart. VOC content is determined according to § 59.104(a).
(b)Different combinations or mixing ratios of coating components constitute different coatings. For example, coating components may be mixed one way to make a primer, and mixed another way to make a primer sealer. Each of these coatings must meet its corresponding VOC content limit in table 1 of this subpart. If the same combination and mixing ratio of coating components is recommended by a regulated entity for use in more than one category in table 1 of this subpart, then the most restrictive VOC content limit shall apply.
Connections2 cite this
Cited by 2 sections
Citation graph
cites case law
§ 59.102
Standards.
Fed. Reg.×2
Cites 0Cited by 2 across 1 source